FORGED TUBESHEETS
Diameter: up to 2,500 mm
Thickness: up to 1,000 mm
Weight: up to 25 tons
Forged TubeSheets are used in heat exchangers which can be fixed and floating. The Tube Sheets must withstand the loads deriving from the pressures exerted by the two fluids and the temperature differences of the same. (Not necessary to explain as those interested would know what a Tubesheet is)
| Ferritic and martensitic steels | ||
|---|---|---|
| 11CrMo9-10 | W.Nr. 1.7383 | EN 10222-2 |
| 13CrMo4-5 | W.Nr. 1.7335 | |
| 16Mo3 | W.Nr. 1.5415 | |
| X16CrMn5-1 | W.Nr. 1.7366 | |
| X10CrMoVNb9-1 | W.Nr. 1.4903 | |
| X20CrMoV11-1 | W.Nr. 1.4922 | |
| P245GH | W.Nr. 1.0352 | |
| P250GH | W.Nr. 1.0460 | |
| P280GH | W.Nr. 1.0426 | |
| P305GH | W.Nr. 1.0436 |
| Stainless steels | ||
|---|---|---|
| X2CrNi18-9 | W.Nr. 1.4307 | EN 10222-5 |
| X2CrNiMo17-12-2 | W.Nr. 1.4406 | |
| X2CrNiMo17-13-2 | W.Nr. 1.4404 | |
| X2CrNiMoN22-5-3 | W.Nr. 1.4462 | |
| X2CrNiMo17-13-3 | W.Nr. 1.4429 | |
| X2CrNiMo25-7-4 | W.Nr. 1.4410 | |
| X3CrNiMo13-4 | W.Nr. 1.4313 | |
| X3CrNiMoN17-13-3 | W.Nr. 1.4436 | |
| X5CrNi18-10 | W.Nr. 1.4301 | |
| X5CrNiMo17-12-2 | W.Nr. 1.4401 | |
| X6CrNi18-11 | W.Nr. 1.4948 | |
| X6CrNiMoTi17-12-2 | W.Nr. 1.4571 | |
| X6CrNiNb18-10 | W.Nr. 1.4550 | |
| X6CrNiTi18-10 | W.Nr. 1.4541 | |
| X2CrNiMo18-14-3 | W.Nr. 1.4435 | |
| X2CrNiMo17-12-3 | W.Nr. 1.4432 |
| Alloy special steels | |
|---|---|
| 20MnMoNi4-5 | EN 10250-3 |
| Stainless steels | |
|---|---|
| X12Cr13 | EN 10250-4 |
| X3CrNiMo13-4 |
| Forged or rolled alloy and stainless steel pipe flanges | |
|---|---|
| Most typical: | ASTM A182/A182M |
| A182 F1 | |
| A182 F2 | |
| A182 F5 | |
| A182 F6a Cl. 1 | |
| A182 F6a Cl. 2 | |
| A182 F6a Cl. 3 | |
| A182 F6NM | |
| A182 F11 Cl. 1 | |
| A182 F11 Cl. 2 | |
| A182 F11 Cl. 3 | |
| A182 F12 Cl. 1 | |
| A182 F12 Cl. 2 | |
| A182 F21 | |
| A182 F22 Cl.1 | |
| A182 F22 Cl.2 | |
| A182 F22V | |
| A182 F51 | |
| A182 F53 | |
| A182 F55 | |
| A182 F92 | |
| A182 F304 | |
| A182 F404L | |
| A182 F304H | |
| A182 F310 | |
| A182 F310H | |
| A182 F310MoLN | |
| A182 F316 | |
| A182 F316L | |
| A182 F316LN | |
| A182 F316Ti | |
| A182 F316 Urea Grade | |
| A182 F317 | |
| A182 F317LN | |
| A182 F321 | |
| A182 F321H | |
| A182 F347 | |
| A182 F347H |
| Hot rolled & cold finished steel age hardening stainless bars and shaping | |
|---|---|
| UNS N04400/N08811 | ASTM B564/B564M |
| UNS N08800/N08810 | |
| UNS N08825/N010276 | |
| UNS N06625 |
| Nickel steels | ||
|---|---|---|
| 12Ni14 | W.Nr. 1.5637 | EN 10222-3 |
| X12Ni5 | W.Nr. 1.5680 |
| Weldable fine grain steels | ||
|---|---|---|
| P285NH | W.Nr. 1.0477 | EN 10222-4 |
| P355NH | W.Nr. 1.0565 | |
| P420NH | W.Nr. 1.8932 | |
| P285QH | W.Nr. 1.0478 | |
| P355QH1 | W.Nr. 1.0571 | |
| P420QH | W.Nr. 1.8936 |
| Carbon steel forging | ||
|---|---|---|
| C22 | EN 10250-2 | |
| 20Mn5 | ||
| 20Mn5N | ||
| 20Mn5V | ||
| S235JRG2 | W.Nr. 1.0038 | |
| S235J2G3 | W.Nr. 1.0116 | |
| S355J2G3 | W.Nr. 1.0570 |
| Weldable fine grained structural steels | |
|---|---|
| W/T/STE285 | DIN 17103 |
| W/T/STE355 | |
| W/T/STE420 | |
| W/T/STE460 | |
| W/T/STE500 |
| Customer requirements | |
|---|---|
| 12CrMo19-5 | Customer requirements |
| 12CrMo9-10 | |
| 15NiCuMoNb4-5-6 |
| Carbon steel for piping components | ||
|---|---|---|
| A105/A105M | ASTM A105 |
| Carbon and low alloy steel forgings | |
|---|---|
| A350LF2 | ASTM A350/A350M |
| A350LF3 | |
| A350LF6 |
| Carbon steel forgings for pressure vessel components | |
|---|---|
| A266 Gr. 2 | ASTM A266/A266M |
| A266 Gr. 4 |
| Alloy steel forgings for pressure and high temperature parts | |
|---|---|
| Most typical: | ASTM A336/A336M |
| A336 F1 | |
| A336 F5 | |
| A336 F5A | |
| A336 F11 | |
| A336 F22 | |
| A336 F22V | |
| A336 F9 | |
| A336 F91 | |
| A336 F92 |
| Quenched and tempered vacuum-treated carbon and alloy steels | |
|---|---|
| A508 Gr. 1 | ASTM A508/A508M |
| A508 Gr. 2 | |
| A508 Gr. 3 | |
| A508 Gr. 4N |
| Carbon and alloy steel forgings for pipe, flanges, fittings valves and parts | |
|---|---|
| A694 F52 | ASTM A694/A694M |
| A694 F60 | |
| A694 F65 | |
| A694 F70 |
| Carbon and low-alloy steel forgings with mandatory toughness requirements | |
|---|---|
| A765 Gr. I | ASTM A765/A765M |
| A765 Gr. II | |
| A765 Gr. III | |
| A765 Gr. IV |
| Alloy steel forgings | |
|---|---|
| UNS N08904 | ASTM B625/B625M |
| Nikel-copper alloy | |
|---|---|
| UNS N04400 | ASTM B564/B564M |